Carburetor and Valve Cleaner

DESCRIPTIONCarburetor and Valve Cleaner is a modern, ash-free combination of additives with cleaning and dispersing properties which protects the carburetor components. The product has been formulated using state-of-the-art additive and fuel technologies in accordance with the requirements of today's engines, fuels and running conditions.-

PROPERTIES

- Protects fuel against oxidation and ageing
- cleans the carburetor and intakes
- breaks down residues in valves and combustion chamber
- normalises petrol consumption and exhaust values
- reduces knocking tendency in the engine
- increases economy, operational reliability and performance
- protects against carburetor icing
- protects against corrosion throughout the fuel system
- tried and tested in catalytic converters and turbochargers
- long-term effect

TECHNICAL
DATA

Basis:additive mixture in liquid carrier
Colour: yellow
Density at 20 °C:0.78g/cm3
German VbF hazard class:A II
Flash point: +43°C
Pour point:°C

APPLICATION Used as an additive for the fuel of all 2-stroke and 4-stroke petrol engines,especially for motor vehicle engines. Also used for small engines for ships and industry.When decommissioning and preserving engines, add Carburetor and Valve Cleaner to the petrol at the rate of 1 %. Follow the instructions for decommissioning and preserving engines.

INSTRUCTIONS One 300 ml can is sufficient for 70 litres of fuel. Mix the contents of the can with the fuel. Mixing takes place automatically.

Time between additions Add to fuel every 2,000 km for long-term effect. The fuel tank should be at least half to completely full. For constant use, add to fuel at the rate of 0.3-0.5 %.

WORKSHOP USE For a poor or non-uniform compression diagram, Carburetor and Valve Cleaner is best used for flushing the valves. With the engine running, slowly add the contents of the can to the carburetor (air choke).

AVAILABLE
PACK SIZESCarburetor and Valve Cleaner
300 ml can Part no. 2507
300 ml can Part no. 2810